10' RPL Fabric Pop-Up Display with Endcaps | Straight Backdrop Wall

A 10-foot straight accordion backdrop with wrap-around endcaps. The graphic covers the front face and folds back over both sides of the frame, so the aluminum and the scissor mechanism do not show from an angle — the wall reads as a solid box rather than a printed panel with metal edges. The endcap panels are 11.81 in. on each side.

Finished size is 116.75 in. wide by 90 in. high. The graphic arrives attached to the frame on hook-and-loop strips and stays attached when it folds, so setup is pulling the frame open and locking it — about two minutes, one person, no tools.

Single- or double-sided printing. Single-sided covers the front and both endcaps; double-sided adds the back face for an island or a pass-through position.

Specifications

• Display size: 116.75 in. W x 90 in. H
• Template size: 143.75 in. W x 90 in. H
• Endcaps: 11.81 in. panels on both sides
• Graphic material: stretch polyester, dye-sublimation print
• Frame: aluminum accordion, tool-free, graphic pre-attached with hook-and-loop
• Setup: about two minutes, one person
• Ship weight: 29 lbs
• Ship carton: 14 in. L x 12 in. W x 32.75 in. H, one box
• Production: 2–3 business days after artwork approval

What's included

• (1) dye-sublimated graphic with endcaps, single- or double-sided
• (1) aluminum frame
• (1) black nylon carry bag

Shipping

Free ground shipping within the continental United States. One 32.75 in. carton at 29 lbs.

What the endcaps are actually for

On an inline 10x10 booth nobody looks at your backdrop straight on. They see it at an angle from down the aisle, and that is the view where an uncapped pop-up shows its frame. The endcaps cost graphic area — 143.75 in. of printed width produces 116.75 in. of visible face — and buy a finished edge from the direction people actually approach. Keep important artwork clear of the outer 12 inches on each side so it does not disappear around the corner.

Ordering from Stow, Ohio

Send a logo and we lay the graphic out to the 143.75 x 90 in. template with the endcap wrap accounted for, send a proof, and say plainly if the artwork will not hold up at this size. For customers across Northeast Ohio — Akron, Cleveland, Canton, Kent, Hudson, Youngstown — we can deliver the display and set it up with you the first time. Outside the region it ships in its bag.

Frequently asked questions

Do I take the graphic off to pack it?
No. It stays on the frame on the hook-and-loop strips. Fold the frame down with the graphic attached, put it in the bag, and open it again at the next show.

What do the endcaps do?
They are fabric extensions that fold back over the sides of the frame, hiding the scissor mechanism so the display looks like a solid wall from an angle instead of an exposed edge.

I already have a graphic from another pop-up. Will it fit this frame?
Usually not. The graphic is cut to this frame's 143.75 in. template and its hook-and-loop strips are placed to match this mechanism, so a panel built for another system will either fall short or hang slack. Measure before you buy — here is what to check before buying a frame for a graphic you already own.

Can I replace the graphic later?
Yes. Peel the old graphic off the hook-and-loop strips and press the new one on. The frame carries on; send updated artwork whenever the campaign changes.

Single-sided or double-sided?
Single-sided prints the front and both endcaps and is right when the back faces a wall. Double-sided adds the rear face for an island booth or a pass-through.

Related: One Choice® 10' fabric pop-up display · Curved RPL pop-up with endcaps · Buying a frame for a banner you already own · All trade show displays · Request a quote