10' Round Tapered Skybox Fabric Hanging Banner | 10'x42" Ceiling Display

A round tapered sign is a cone. The top ring is wider than the bottom, so the printed band leans inward and faces slightly down toward the aisles instead of straight out over people's heads. That is the whole reason to pick this shape over a straight cylinder: at floor level you are reading the graphic at an angle, not edge-on.

At 10 ft. across the top and 8 ft. at the bottom, with a 42 inch printed face, this is the size for a 20x20 island or a 10x20 inline where the show allows a hanging sign.

Assembled size

• Top diameter: 10 ft.
• Bottom diameter: 8 ft.
• Printed face height: 42 in.
• Frame: collapsible extruded aluminum tubing with curved stabilizers and corner connectors

Check the assembled size against the footprint you have bought, not the aisle the sign hangs over. Most shows require a hanging sign to sit inside the booth space you have paid for.

What is in the box

• Collapsible extruded aluminum round tapered frame with curved stabilizers and corner connectors. It goes together by hand, no tools.
• Dye-sublimated tension fabric graphic printed to your artwork, which slides over the frame like a pillowcase and zips closed along one edge.
• Rigging hardware set: hanging cable, chain, spring, eye hooks, large screws, hook loop locks and a screw tightener.
• Nylon carry bag.

This listing is the complete sign, frame and graphic and hanging hardware together. A frame without a graphic, or a replacement graphic for a frame you already own, is not a cart option on this page. Call or email and we will quote it.

Print options

Single-sided with white back fabric, single-sided with black back fabric, or double-sided. Single-sided prints the outer face and leaves the inner wall plain; black reads as a shadow from underneath, white stays light. Double-sided prints the inner wall as well, which is what you want if people inside the booth will be standing under it and looking up.

Getting it hung

Convention centers almost always require their own certified riggers to hang anything from the ceiling. You hand them this kit and they put it up. Order the rigging labor through the show's exhibitor services kit, and order it before the advance deadline, because rigging is one of the line items that costs noticeably more arranged on site. Most shows also limit overhead signs to island booths and set a maximum height to the top of the sign; both rules are in the exhibitor kit for your show.

Artwork

The print template comes with your proof, cut for this frame. Send artwork as vector or at full size and we will proof it before anything goes to print. The graphic unzips off the frame, so a rebrand later is a reprint on hardware you already own.

Shipping

Free ground shipping.

The other round tapered sizes

12 ft. with a 42 in. face · 12 ft. with a 48 in. face · 15 ft. with a 48 in. face. If you want a straight cylinder rather than a cone, the 10 ft. round hanging sign is the same diameter without the taper.

If the show is in Northeast Ohio

We are in Stow. We install exhibits at convention centers around Cleveland and Akron and store booth property between shows, so setup, freight and storage can come off your list. The sign itself still goes up on the venue's own rigging crew.