One Choice® Illuminated Lightbox Counter | Backlit Trade Show Podium

Product overview

A lit counter for the front of a booth, 39 3/8 in. wide, 40 5/8 in. tall and 16 in. deep, with a black laminate top. LED strips sit along the inner edges of the aluminum frame and light the fabric face evenly rather than from a single point, so the graphic reads from across an aisle under hall lighting.

The frame is four profiles and four clip connectors. It goes together by hand, with no tools, and comes apart the same way. The package includes two single-sided graphics, so the counter can be printed on the front and back face or run with one printed face and one kept blank.

Graphics are dye-sublimated backlit fabric with a silicone bead sewn around the edge that presses into the frame groove. A new graphic next season does not mean new hardware.

What is in the package

• (1) bottom frame profile
• (1) left frame profile
• (1) right frame profile
• (1) countertop and top profile
• (1) transformer and transformer bag
• (4) plastic clip connectors
• (2) single-sided dye-sublimated graphics with SEG finishing

Specifications

• Assembled size: 39 3/8 in. W x 40 5/8 in. H x 16 in. D
• Graphic template: 39.875 in. W x 39.875 in. H
• Countertop load: 10 lb, enough for a tablet, literature or light samples
• Frame: aluminum profile, tool-free clip assembly
• Graphics: dye-sublimated backlit fabric, SEG silicone edge
• Power: one standard outlet, transformer included
• Shipping carton: 43 in. L x 13 in. W x 7 in. H, about 26 lb

Shipping

One carton at about 26 lb. Free ground shipping. Production time is confirmed on your order after artwork approval.

Questions buyers ask

How does the lighting work? LED modules are pre-installed along the inner edges of the frame. Once the four profiles are clipped together, the transformer plugs into a standard venue outlet.

How much weight will the top hold? 10 lb. It is a graphic counter with a usable surface, not a work bench, so a tablet, a literature stack or product samples are the right load.

Can the graphic be changed later? Yes. The silicone edge pushes out of the frame groove by hand and a new printed panel goes in the same way. Email sales@dgcreativ.com for a reprint on hardware you already own.