Custom Printed Canopy Half-Walls & Side Walls

Overview

Printed side panels that clamp to the legs of a pop-up canopy tent. They close off the open sides of a booth, hide the crates and coolers under the tables, and add a second run of branding at the height people actually look as they walk past. The traffic effect is the practical one: with two sides closed, visitors come in through the face you chose rather than cutting across a corner.

Printing is dye-sublimated on commercial outdoor tent fabric, single sided with a white back or double sided. Trim is black or white.

Three configurations

10 ft. with aluminum rail. A 114.5 x 41 in. graphic on an aluminum top rail with leg clamps. 5 lb., and the one to choose if the walls travel. Fits the sides of 10, 15 and 20 ft. tents.

10 ft. with steel rail. The same 114.5 x 41 in. graphic on a steel top rail with leg clamps. Steel is the heavier, less expensive rail. 8 lb.

5 ft. with aluminum rail. A half-wall sized for the side of a 5 ft. canopy frame, on an aluminum rail with leg clamps.

The 10 ft. panels stand 41 in. high, which is waist height on most people and deliberately low enough to see over and talk across.

Specifications

• Graphic size (10 ft.): 114.5 x 41 in.
• Material: dye-sublimated tent fabric, water resistant, UV protected
• Print: single sided with a white back, or double sided
• Rail: steel or aluminum, with adjustable clamps for round, square and hex legs
• Trim color: black or white
• Wind rating: 20 to 28 mph
• Shipping weight (10 ft.): 5 lb. with the aluminum rail; 8 lb. with the steel rail
• Shipping carton (10 ft.): 57.5 in. L x 5.75 in. W x 3 in. H

Fitting a tent you already own

The clamps are adjustable and fit round, square and hex legs, so these generally go onto a frame you already have whoever made it. Send a photograph of the leg and the measurement across it and we will confirm before printing.

Shipping

Shipping is quoted at checkout on this item. Production time is confirmed on your order after artwork approval.