Big Sky Tower Backlit LED Display | Square Silver Frame Exhibit Tower

A four-sided square tower that lights from the inside. LED ladder lights hang in the center of the frame and throw light outward onto all four fabric faces, so the tower reads as a lit column rather than a printed one. It is the piece that gets a booth seen from the far end of a hall, and it works the same way in a lobby or an arena concourse.

The frame is aluminum extrusion, 60D verticals and 40CG horizontals, joined with split connectors and support struts and set with a Torx key. The graphics are silicone-edge backlit fabric: a sewn bead around each panel presses into the channel on the extrusion, which pulls the face flat with no visible frame edge. Each of the four faces is independent, so one can be reprinted for a new sponsor or a new product without touching the other three or the hardware.

Eye hooks are included for hanging where a venue allows it. Check the exhibitor kit first, because most halls require their own rigging labor for anything suspended and that is ordered separately from the show.

Sizes

Nine configurations, by face width and overall height. All are 4 ft. deep.

• 4 ft. wide: 4 x 12 ft. (graphic 48 x 144 in.), 4 x 14 ft. (48 x 168 in.), 4 x 16 ft. (48 x 192 in.)
• 5 ft. wide: 5 x 12 ft. (60 x 144 in.), 5 x 14 ft. (60 x 168 in.), 5 x 16 ft. (60 x 192 in.)
• 6 ft. wide: 6 x 12 ft. (72 x 144 in.), 6 x 14 ft. (72 x 168 in.), 6 x 16 ft. (72 x 192 in.)

What's included

• SEG backlit printed graphics
• 60D vertical extrusions and 40CG horizontal extrusions
• Split connectors, support struts and eye hooks
• Torx key
• Ladder light, ladder light wires, transformer and power cord
• Hard case with wheels

The graphic-only option covers one panel. Order the number of faces you need.

What you need at the venue

One standard outlet within cord reach, and height clearance for the configuration you choose. A 16 ft. tower will not pass under a 14 ft. ceiling or a hall's hanging-sign limit. Both the electrical drop and any rigging are ordered from the show, and those deadlines usually fall earlier than the freight deadline.

Shipping

Shipping on this item is quoted at checkout. It travels in the wheeled hard case.

Frequently asked questions

How does the lighting work?
LED ladder lights hang inside the frame and light all four faces from within. One transformer and power cord run to a standard outlet.

Can I replace one face?
Yes. All four panels are independent and press into the channels separately.

Can it hang instead of stand?
Eye hooks are included, but suspension depends on the venue's rules and its rigging labor. Confirm against the exhibitor kit before ordering on that basis.

Ordering from Stow, Ohio

Backlit fabric is unforgiving. Light coming through a graphic shows thin areas, heavy black fills and low-resolution placements that would pass unlit. Send the artwork and we lay out all four faces, proof them, and say plainly if something will not hold up lit from behind. For customers across Northeast Ohio we can deliver the tower and set it up with you the first time, which is worth doing once on a piece this tall.