Name: 5 x 7.5 ft. Lumiere Light Wall® Backlit Single-Sided
Brand: DG Creativ LLC
Price: 2015.0 USD
Availability: InStock

A 5 ft. wide backlit wall that one person can put up in about 25 minutes and carry in two cases. The Lumiere Light Wall pairs a collapsible pop-up frame with silicone-edge fabric graphics and LED ladder lights mounted inside the frame, so the graphic is lit from behind rather than by a clamp light aimed at it from the aisle.

It breaks down further than most lit walls of this size: the geometric frame collapses, the channel bars fold on their bungee cords, and the graphics fold or roll. Nothing needs a crate.

Key Features

• Lit from inside the frame: LED ladder light sets sit within the frame and wash the graphic evenly from behind. No hot spots, no lighting rig, no arm reaching over the top of the display.

• Borderless SEG finish: The graphic has a silicone bead sewn into its edge that tucks into the channel bars, so the fabric pulls flat and the frame disappears behind it.

• One-person, 25-minute setup: The frame pops open by hand and the channel bars clip on. No tools.

• Connects into a longer wall: Several Lumiere walls join side by side to build a 10 ft. or 20 ft. back wall. However many you connect, you still only need one pair of end caps.

• Single- or double-sided: Single-sided ships with a backlit front graphic and a blockout backer. Double-sided ships two backlit graphics. Either way the lights are installed on one side of the frame only — the same quantity does both.

• Printed end caps optional: The side caps can be left plain or printed to carry branding around the edges of the wall.

Specifications

Assembled size: 59.25 in. W x 88.75 in. H x 14.5 in. D
Graphic size: 59.25 in. W x 88 in. H
Frame: collapsible pop-up frame with bungee-corded SEG channel bars
Lighting: two 1x3 LED ladder light sets with transformers and power cords
Graphic material: dye-sublimated backlit stretch fabric with silicone edge
Frame carton: 34 in. x 14 in. x 9 in., 28 lbs including graphics
Light carton: 30.5 in. x 7.5 in. x 5.5 in., 16 lbs
Total shipped: two cartons, 44 lbs
Setup: one person, about 25 minutes

What's Included — Single-Sided

(1) Pop-up frame and carry bag
(4) 2-section channel bars and (4) 3-section channel bars, with bag
(2) 1x3 LED ladder light sets with travel bags, (2) transformers and (2) power cords
(1) 5 x 7.5 ft. backlit graphic and (1) 5 x 7.5 ft. blockout graphic
(2) end caps, plain or printed by selection

What's Included — Double-Sided

(1) Pop-up frame and carry bag
(4) 2-section channel bars and (4) 3-section channel bars, with bag
(2) 1x3 LED ladder light sets with travel bags, (2) transformers and (2) power cords
(2) 5 x 7.5 ft. backlit graphics
(2) end caps, plain or printed by selection

Shipping

Shipping on this display is quoted at checkout. It goes out as two cartons totaling 44 lbs — a 34 x 14 x 9 in. frame case and a 30.5 x 7.5 x 5.5 in. light case.

Where a 5 ft. backlit wall fits

Five feet is the width that lights up a corner of a 10x10 booth without taking the whole back wall, so it pairs well with a counter and a monitor. Two of them side by side make a lit 10 ft. wall; four make 20 ft.

Outside the exhibit hall it holds up in permanent and semi-permanent places: lobby and reception walls, showroom and dealership displays, hospital and clinic wayfinding, retail entrances, and hotel and conference registration areas where the graphic changes with the campaign but the frame stays on the wall.

Ordering from Stow, Ohio

Backlit graphics are not ordinary prints — density and contrast behave differently when light passes through the fabric instead of bouncing off it. We lay out the artwork, proof it, and say plainly if a logo or a photograph will wash out once it is lit. That is worth more than a template.

For customers across Northeast Ohio — Akron, Cleveland, Canton, Kent, Hudson, Youngstown — we can deliver the wall, set it up at the venue and store it between shows, then reprint the graphic for the next one. Outside the region it ships in its two cases.

Frequently Asked Questions

Do the lights go on both sides for a double-sided graphic?
No, and they do not need to. The LED ladder lights mount on one side of the frame and light both faces through the fabric. Single-sided and double-sided packages use the same number of light sets.

Can I start with one and add more later?
Yes. Walls connect side by side to build a wider back wall, and you only ever need one pair of end caps for the finished run. Buying a second unit next year gets you a 10 ft. wall.

What is the difference between the end cap options?
Plain end caps close off the sides of the frame in solid fabric. Printed end caps carry your artwork around the edges, so the branding continues when the display is seen from an angle in the aisle.

Does it need a special power supply?
No. The two transformers plug into a standard outlet. Budget for one power drop at the booth.

Can I reprint just the graphic later?
Yes. The frame, channel bars and lights are the investment and last for years. Send new artwork and we print a replacement backlit graphic to the same 59.25 x 88 in. layout.

Will the hard case hold everything?
A hard case option holds one frame with its bag, the channel bars with their bags, and a full set of LED ladder lights with transformers and clips, for frame sizes up to 10 x 7.5 ft.

5 x 7.5 ft. Lumiere Light Wall® Backlit Single-Sided