Name: 20 ft L-Shape Lumiere Light Wall® Configuration C No Lights Single-Sided
Brand: DG Creativ LLC
Price: 13674.0 USD
Availability: InStock

The largest unlit wall in the Lumiere range: a 20-foot run that turns a corner, 236 in. wide and 118 in. tall, with a 103 in. return down the side. Nearly ten feet of printed stretch fabric on both faces of both walls, and nothing to plug in.

Settle the height before you order. At 118 in. this is taller than the back wall height many shows allow in an inline space. The limit is printed in your exhibitor kit. Send us the show and we will check it before you commit, and quote a configuration that fits if this one does not.

Key Features

• Turns the corner: Three Lumiere pop-up frames, in 10 x 7.5 ft. and 10 x 10 ft. sizes, tie together with four L-connectors and eight straight connectors. The corner gives a booth two faces of signage instead of one.

• Printed on both faces: Six main graphics, three to a face, plus three end cap graphics that carry the artwork around the edges. A shopper walking either direction up the aisle reads a graphic, not a frame.

• Nothing to plug in: This package is supplied unlit. No transformers, no light brackets, no power drop to order from the hall. Clamp lights can be added later and aimed at it from the front; for light inside the frame, the backlit Lumiere packages carry LED ladder light sets.

• Borderless SEG finish: Each graphic has a silicone bead sewn around its perimeter that tucks into the channel bars, so the fabric pulls flat and the aluminum disappears behind it.

• Tool-free frames: The geometric frames pop open by hand and the channel bars clip on. Nothing in the cartons can be dropped in the carpet and lost.

• Reprint the fabric, keep the frame: The frames, bars and connectors are the long-term purchase. New artwork means new fabric printed to the same panel sizes.

Specifications

Assembled size: 236 in. W x 118 in. H x 103 in. D
Graphic sizes: 117.5 x 117.5 in. and 88.75 x 117.5 in. main panels; 13.375 x 117.5 in. end caps
Frames: three Lumiere pop-up frames, 10 x 7.5 ft. and 10 x 10 ft.
Lighting: none supplied
Graphic material: dye-sublimated stretch fabric
Finishing: SEG, silicone beading sewn around the perimeter of the fabric
Shipped as: three cartons, each 34 x 14 x 9 in., 120 lbs in total
Setup: tool-free

What's Included

(6) main graphics, three front and three back
(3) end cap graphics
(3) pop-up frames, 10 x 7.5 ft. and 10 x 10 ft.
(20) 4-section channel bars and (4) 3-section channel bars
(12) end cap channel bars
(3) channel bar bags and (3) frame carry bags
(4) L-connectors and (8) straight connectors

Shipping

Shipping on this display is quoted at checkout. It is not in our free ground shipping group. It goes out as three cartons of 34 x 14 x 9 in., 120 lbs in total.

What you need at the venue

Floor space for an L of 236 in. along the back and 103 in. down the side
A step ladder: the top channel bars sit close to 118 in.
No power drop and no tools
Two people, in our experience, rather than one, because of the height and the corner joint

Where a 20 ft. corner wall fits

This is a wall for a corner or peninsula space of 20 ft. by around 10 ft., where two sides of the booth face traffic. In an inline 20 ft. space the 103 in. return would eat most of the depth, so the straight 20 ft. Lumiere wall is usually the better fit there.

Away from the exhibit hall, an unlit fabric wall this size works as a backdrop for press conferences, award nights, job fairs, graduations and sponsor walls, where it goes up in a gym or ballroom and comes down the same night.

Ordering from Stow, Ohio

Large fabric panels are easy to get wrong on screen. A logo that looks crisp in a proof at letter size can arrive soft at 117 in. wide, and a photograph that crosses two panels has to be laid out so the seam falls somewhere forgiving. We set the artwork up, proof it, and say plainly when something will not hold at this size.

For customers across Northeast Ohio — Akron, Cleveland, Canton, Kent, Hudson, Youngstown — we can deliver the wall, set it up at the venue, store it between shows and reprint the fabric for the next one. Outside the region it ships in its three cartons.

Show rules vary. Check your show's guidelines before ordering, and if the configuration has to change to meet them, email sales@dgcreativ.com and we will quote the change.

Frequently Asked Questions

Does it come with lights?
No. This package is the unlit version, which is why it costs what it does. Clamp lights can be aimed at it from the front. If you want the graphic lit from inside the frame, the backlit Lumiere packages include LED ladder light sets and transformers.

Is the artwork on both sides?
Yes. Six main graphics are supplied, three for each face, plus three end cap graphics for the edges.

Will it meet my show's height limit?
At 118 in. it is taller than the common 8 ft. inline back wall limit, so in most inline spaces it will not. Islands and peninsulas often allow more. Send us the show name and we will read the rules with you.

Can the same frames be built straight instead of in an L?
The kit includes both L-connectors and straight connectors, so the panels join either way. Tell us the booth sizes you expect over the next couple of years and we will say whether this set of frames covers them.

Can I reprint just the graphics later?
Yes. Send new artwork and we print replacement fabric to the same panel sizes. The frames and bars stay.

20 ft L-Shape Lumiere Light Wall® Configuration C No Lights Single-Sided