Name: 10 x 10 ft. Lumiere Light Wall® Configuration I Single-Sided
Brand: DG Creativ LLC
Price: 9630.0 USD
Availability: InStock

Two lit walls meeting at a right angle, which turns a corner booth into two faces of backlit signage instead of one. The published footprint is 118.5 in. wide by 89 in. high with a 103 in. return, so it sits inside a 10x10 corner space. At 89 in. tall it also clears the 8 ft. back wall limit most shows set for inline and corner spaces.

Both frames are 10 x 7.5 ft. and both are lit from inside: eight LED ladder light sets sit within the frames and wash the fabric from behind, so the graphic glows rather than being spot-lit from the aisle.

Key Features

• Lit from inside the frame: Eight LED ladder light sets mount on the light brackets inside the aluminum and light the backlit fabric evenly from behind. No lighting rig, no arm reaching over the top of the display.

• Two faces of signage: Three L-connectors turn the corner. Four main graphics, two to a face, plus three end cap graphics that carry artwork around the edges, so traffic from either direction reads a lit panel.

• Borderless SEG finish: Each graphic has a silicone bead sewn around its perimeter that tucks into the channel bars. The fabric pulls flat and the frame disappears behind it.

• Fits the height rule: 89 in. assembled, under the 96 in. inline back wall limit common at trade shows. Worth checking your own exhibitor kit, but this configuration is not one that usually needs an exception.

• Tool-free: The frames pop open by hand, the channel bars clip on and the light brackets are already positioned. The lights, not the frame, take most of the build time.

• Reprint the fabric, keep the frame: Frames, bars and lights are the long-term purchase. New artwork means new backlit fabric printed to the same panel sizes.

Specifications

Assembled size: 118.5 in. W x 89 in. H x 103 in. D
Graphic sizes: 117.5 x 88.5 in. main panels; end caps 101.8 x 88.5 in. and 130.8 x 88.75 in.
Frames: two Lumiere pop-up frames, 10 x 7.5 ft., joined with three L-connectors
Lighting: eight LED ladder light sets with eight transformers, supplied
Graphic material: UV backlit fabric, dye-sublimated
Finishing: SEG, silicone beading sewn around the perimeter of the fabric
Shipped as: four cartons, 128 lbs in total; frame cases 34 x 14 x 9 in., light cases 29.75 x 5.5 x 5.5 in.
Setup: tool-free; one person can build it, two is faster at this size

What's Included

(4) main graphics, two front and two back
(3) end cap graphics
(2) pop-up frames, 10 x 7.5 ft., with carry bags
(8) 4-section channel bars, (8) 3-section channel bars and (6) end cap channel bars, with (2) channel bar bags
(3) L-connectors
(8) LED ladder light sets with (8) transformers
(2) transformer power cords and (8) male/female transformer connector cords
(32) middle light brackets and (32) top and bottom light brackets

Shipping

Shipping on this display is quoted at checkout. It is not in our free ground shipping group. It goes out as four cartons totaling 128 lbs: two frame cases at 34 x 14 x 9 in. and two light cases at 29.75 x 5.5 x 5.5 in.

What you need at the venue

Floor space for an L of 118.5 in. along the back and 103 in. down the side
Power at the booth. Eight transformers are supplied with eight male/female connector cords and two transformer power cords, so the light sets chain together and come back to two plugs
No tools, and no ladder for most people at 89 in.
Allow longer than you would for an unlit frame. Clipping in the light sets and their brackets is the slow part

Where a lit corner wall fits

This is the configuration for a 10x10 corner booth, the one where the aisle runs past two sides of you. A straight back wall throws away the second face; this one prints it. It also suits a 10x20 where you want the corner treated as the entrance.

Outside the exhibit hall it holds up in permanent and semi-permanent places: lobby and reception corners, showroom and dealership displays, hospital and clinic entrances, university recruiting spaces, and hotel and conference registration areas where the graphic changes with the campaign and the frame stays put.

Ordering from Stow, Ohio

Backlit graphics are not ordinary prints. Density and contrast behave differently when light passes through the fabric instead of bouncing off it, and a dark logo that reads well on paper can go muddy once it is lit. We lay the artwork out, proof it, and say plainly when something will wash out.

For customers across Northeast Ohio — Akron, Cleveland, Canton, Kent, Hudson, Youngstown — we can deliver the wall, set it up at the venue, store it between shows and reprint the graphics for the next one. Outside the region it ships in its four cases.

Show rules vary. Check your show's guidelines before ordering, and if the configuration has to change to meet them, email sales@dgcreativ.com and we will quote the change.

Frequently Asked Questions

Are the lights included?
Yes. Eight LED ladder light sets, eight transformers, the connector cords and all the light brackets are in the package. There is nothing else to buy to light it.

How many outlets will I need?
The eight transformers chain together through the supplied connector cords and run back to two power cords. Order a power drop for the booth and tell us if you need the exact outlet count confirmed for your show in writing.

Is it printed on both faces?
Yes. Four main graphics are supplied, two for each face, plus three end cap graphics for the edges.

Will it pass my show's height rule?
At 89 in. it is under the 96 in. inline limit most shows use. Confirm against your own exhibitor kit, since a few shows set lower limits on the first few feet from the aisle.

Can I reprint just the graphics later?
Yes. The frames, bars and lights last for years. Send new artwork and we print replacement backlit fabric to the same panel sizes.

10 x 10 ft. Lumiere Light Wall® Configuration I Single-Sided