10 ft. Kit A EZ Tube® Connect

Kit A is a 10-foot EZ Tube Connect back wall built from three frames: two 2-foot slant-top side panels flanking one 5-foot center panel, standing 90 inches tall. The aluminum tubing locks together with push-button snaps, so the frame goes up without tools. Stretch fabric graphics pull over each frame and zip closed underneath. Each foot carries two mounting points, which is what ties the three panels into one continuous wall rather than three separate stands.

The kit ships with single-sided graphics. Double-sided fabric is available on request. Frames and graphics pack into the included medium hard case, and the case can be wrapped with its own graphic so it works as a branded podium on the show floor.

Free ground shipping.

Specifications

• Assembled size: 120"W x 90"H x 18.75"D
• Frame: push-button snap aluminum tube, tool-free assembly
• Graphic material: dye-sublimated stretch fabric, zippered
• Sides: single-sided as supplied
• Artwork template, 2 ft. panel: 24"W x 88"H
• Artwork template, 5 ft. panel: 60"W x 88"H
• Artwork template, hard case wrap: 62.375"W x 32.25"H
• Shipping case: 22"W x 39"H x 17"D
• Shipping weight: 60 lbs, frames and graphics
• Setup: roughly 20 minutes, two people, no tools

What is in the box

• (2) Top cross bar, 2 ft. slant
• (2) Bottom cross bar, 2 ft.
• (1) Top cross bar, 5 ft. slant
• (1) Bottom cross bar, 5 ft.
• (6) Three-section 64" pole
• (6) Bottom cross bar L connector
• (2) Single foot, 34 mm
• (2) Double foot, 34 mm
• (4) Connecting clip
• (3) Single-sided graphics
• (2) Soft bag, 2 ft.
• (5) Soft bag, 5 ft.
• (1) Medium hard case

We are in Stow, Ohio. If your show is in Northeast Ohio, ask us about delivery, on-site setup and storage between shows.