Crown Bags at the AMI Plastics World Expo: a turnkey 10x20 booth for a customer with nobody in Ohio

Crown Bags LLC is based in Houston. The show they needed to exhibit at was in Cleveland. They had nobody in Ohio, no booth in a warehouse here, and no way to drive one up, and the hall they were going into does not accept advance freight at all.

That is the whole problem, and it is the problem most out-of-state exhibitors actually have. Not the booth. The six hundred small things that happen around the booth, in a city where you do not know anyone.

The show was the AMI Plastics World Expo, November 10, 2026, at the Huntington Convention Center in downtown Cleveland. Crown Bags found DG Creativ through a search, which is worth saying plainly: they had no local contact to call, which is exactly the position this case study is about.

Nobody on the ground

An exhibitor who is local has options. They can put the booth in a pickup, carry it in on a dolly, and fix a problem at 7am by driving back for the part. An exhibitor flying in has none of that. Every one of those options has to be bought from somebody, and if it is bought from four different companies then somebody at the exhibiting company spends the week before the show holding them together by phone.

So the brief was not "build us a booth." It was closer to: we will arrive, we will stand in the booth and sell, and we would like everything on either side of that to be somebody else's job.

What the venue's rules did to the plan

Three of the Huntington Convention Center's published rules shaped this job before anything was printed. They are set out in full on our exhibiting at the Huntington Convention Center page, and the short version is this:

  • The Center does not accept advance materials or freight. Not "prefers not to" - it does not take them. So there is no shipping the booth up a week early and letting the building hold it. The freight either goes through the show's general service contractor or it arrives inside the designated move-in window and is handled then.
  • Self-unloading is capped. You may unload your own vehicle only if the truck or trailer bed is no longer than 12 feet, by hand or on two-wheel or four-wheel dollies, with no pallet jacks or motorized handling, and with time in the privately owned vehicle area limited to 20 minutes. That rule is what decides whether a booth can be carried in or has to be handled for you.
  • A hanging banner is not a last-minute idea. Rigging and sign hanging at the Center are exclusive to the venue's rigging provider, ordered through exhibitor services against the exhibitor manual's deadlines. The banner therefore has to be engineered to hang, with rated hardware, a known weight and a hang kit, and the order has to go in while the deadlines are still open.

None of that is unusual. All of it is invisible to an exhibitor reading a catalog, and all of it is expensive to discover late.

What DG Creativ supplied and ran

A complete 10' x 20' inline booth, delivered, built, taken down and brought back. Broken into the pieces of work it actually was:

  1. The booth itself. Two 10-foot LED backlit double-sided backdrops, with an overhanging arch off one of them, and a backlit counter carrying double-sided graphics. Backlit rather than printed and lit from outside: the light sits inside the frame and the graphic is the diffuser, which is why a backlit wall reads at the far end of an aisle when a printed one does not.
  2. The hanging banner. A 10-foot diameter round banner, 36 inches deep, hung above the booth. Specified to hang, and ordered against the venue's rigging deadlines rather than the week of the show.
  3. Freight, both directions. Round-trip delivery, aimed at the deadline that applied to this show rather than at a convenient date, given that the building would not hold anything in advance.
  4. Setup and teardown. Installed into the move-in window and dismantled after the show, inside the hall's own rules on who may do what on the floor.
  5. The return trip. The property came back rather than being left as the customer's problem to solve from Texas.

What the customer's team did was turn up and sell. That was the point of the exercise.

Specifications

  • Booth footprint: 10' x 20' inline
  • Two 10' LED backlit backdrops, double-sided, with graphics on both the aisle face and the back
  • Overhanging arch, cantilevered off one backdrop
  • Backlit counter, double-sided graphics
  • Hanging banner: 10' diameter round, 36 inches deep, engineered to hang with rated hardware
  • Venue: Huntington Convention Center of Cleveland, 300 Lakeside Ave. E, Cleveland, OH 44113
  • Show: AMI Plastics World Expo, November 10, 2026
  • Scope: supply, round-trip freight, setup, teardown, return

Fabrication was handled by our fabrication partner to our specification. Project management, graphics, logistics, install and dismantle ran through DG Creativ as the single point of contact, which is the part that makes the difference when the exhibitor is out of state.

Why a double-sided backlit wall, on an inline booth

An inline 10x20 has one open side and neighbors on two of the others, so the instinct is to put everything on the aisle face. Double-siding the backdrops is worth the money anyway, for a reason that has nothing to do with the aisle: the back of your wall is the inside of your booth. On a single-sided wall your own staff and anyone you bring behind the counter stand in front of bare fabric and extrusion. On a double-sided one they stand inside the brand, which is where a conversation that turns into a quote actually happens.

The arch does a different job. It gives the booth a silhouette above head height without buying a hanging structure for it, so it reads from down the aisle in a hall where every inline booth is the same 8 feet tall.

What this job is proof of

Three things, and they are the three an out-of-state exhibitor should ask any supplier to show them.

That somebody will read the venue's rule book. The no-advance-freight rule is in the Huntington's own exhibitor manual. Whether anybody reads it before quoting is the difference between a planned move-in and a bounced shipment.

That the pieces can come from one place. One point of contact for the booth, the graphics, the hanging banner, the freight, the labor and the return trip. See turnkey trade show programs for how that runs across a whole calendar rather than one show.

That the booth does not have to go home with you. Property can stay in secured Northeast Ohio warehouse space between shows, be inspected and re-kitted, and go out to the next show on the calendar, including property another company built. That is set out on booth storage and shipping between shows.

Exhibiting in Cleveland from out of state?

Send the show, your booth number and your move-in date. We will read the display rules and freight sections of that show's exhibitor manual before quoting anything, which is not a courtesy. It is the only way the quote is real.

Request a quote, call 330.968.0678, or email sales@dgcreativ.com. DG Creativ, Stow, Ohio, forty minutes from the Huntington Convention Center.

Related: Exhibiting at the Huntington Convention Center · Booth storage and shipping between shows · Turnkey trade show programs · Trade show displays in Cleveland · 10x20 booth displays and kits · Custom trade show hanging banners · Booth graphics reprints